| Identify your needs | You want to eliminate | We suggest you | Photo of the installing |
DEMINERALIZED WATER
Capacity at 25°F : 286 liters | Ions
responsible for scaling and corrosion | DEM'O 3
Flow rate : 150 liters/hour
Pressure : 4 bar |  |
DEMINERALIZED WATER
Capacity at 25°F : 420 liters | Ions
responsible for scaling and corrosion | DEM'O 4
Flow rate : 150 liters/hour
Pressure : 4 bar |  |
DEMINERALIZED WATER
Capacity at 25°F : 570 liters | Ions
responsible for scaling and corrosion | DEM'O 5
Flow rate : 150 liters/hour
Pressure : 4 bar |  |
EVERYDAY USE
Washing of laboratory vessels
Conditioned Air - Accumulators
Radiators - Antifreeze Preparation
Photo development... | Ions
(Including part of the CO2) | 1 SI Fixing and 1 KCR
+
1 U2
Flow rate recommended : 20 liters/hour |  |
EVERYDAY USE FOR LOADED WATER
Same use as above for a water which is organically very loaded | Ions
(Including part of the CO2)
Organic substances | 1 SI Fixing and 1 KCR + 1 SU Fixing
+
1 ORC column
1 U2
Flow rate recommended : 20 liters/hour |  |
ANALYSES
Medical Analyses
Physicochemical analyses
Printed circuits | Ions
(Including silice and CO2) | 1 SI Fixing and 1 KCR
+
1 SU Fixing and 1 ORC
+
1 R2
Flow rate recommended : 20 liters/hour
or 1 LAB
Flow rate recommended : 30 liters/hour | |
RESEARCH
Sterile media - Enzimology
Microbiology - ultrahigh vacuum
Mineral micro-analyses
Atomic absorption
Spectrometry - Chromatography
Electronic microscopy | Organic substances
Ions
Micro-organisms (to 0,22 micron) | 1 SI Fixing and 1 KCR + 2 SU Fixing
+
1 ORC column
2 R2
Flow rate recommended : 20 liters/hour
or 2 LAB
Flow rate recommended : 30 liters/hour + 1 FLF filter |  |
ULTRA-PURE WATER
Microelectronics - Electrochemistry
Cellular biology - Immunology
Macromolecular analyses | Organic substances
Ions
Dissolved minerals and particles
Micro-organisms (to 0,22 micron) | 1 MOBI.KIT and 1 DSF (support filter)
or
1 SI Fixing and 1 KCR + 3 SU Fixing
+
1 ORC column
2 R2
Flow rate recommended : 20 liters/hour
or 2 LAB
Flow rate recommended : 30 liters/hour
+ 1 M2 ion exchanger
+ 1 FLF filter | 
 |
HIGH ORGANIC PURIFICATION
Microelectronics - Electrochemistry
Cellular biology - Immunology
Macromolecular analyses | Organic substances
Ions
Dissolved minerals and particles
Micro-organisms (at 0,22 micron)
Very weak residual COT | 1 PURO.KIT
Flow rate recommended : 30 liters/hour |  |
